BPMN Interchange Capability Demonstration 2017

BPMN Interchange Capability Demonstration 2017

Are you interested in BPMN? Do you want to see how to move from designing a process to automation?

On June 5th 2017 during OMG Technical Meeting in Brussels BPMN Model Interchange Working Group (BPMN MIWG) presented the Interchange Capability Demonstration.

Below you can see the full recording of the event.

Since I got quite a few questions about the demo scenario from the viewers I thought it would be useful to provide an explanation of what was presented 🙂

What is the BPMN MIWG

As you will learn from the introduction done by Denis who chairs the BPMN MIWG, the goal of our group is to make BPMN interoperability true.

What does it mean in practice? Well – if you write a text document in Word, you would expect that content and formatting will be preserved if your colleague opens it in Google Docs – right?

BPMN is a standard notation for modelling processes. What you create are models, not just pretty pictures. So you can create a process diagram in one tool, send it to your colleague who is using different tool for feedback and extensions and move the ready “business diagram” for your IT specialists who will use it for automating the process. You do not need to re-create a diagram in each tool. You do not need to worry about problems with distorted diagrams. Not only visible attributes (e.g. task types) can be preserved but also hidden attributes that are part of the spec or are execution vendor’s extensions.

Sounds obvious? It was not that obvious in 2013 when the group was started. Before that each vendor had to interpret the specification and test their solution with few selected tools to see if everything is fine. This was hard, time consuming and resulted in many problems with exchanging models.

Luckily for the world (or at least this part of the world interested in BPMN 🙂 Denis Gagne from Trisotech started the BPMN MIWG and vendors interested in BPMN (including BOC Group) got a chance to work together to improve their tools interoperability.

Since this time we did 6 public demonstrations of the interoperability (including the last one in Brussels), prepared over 10 test models and performed tests of over 30 tools (both modelling and automation). Below you can see the preview of the table with test results. Please note it was not updated after the last demo yet (and does not show e.g. results of ADONIS NP).

On the BPMN MIWG page you can see all details of our work – including past demos.

What was presented during the demo

During this demo we were collaboratively modelling few interrelated processes of new employee onboarding. The demo scenario was inspired by a process prepared for new ADONIS NP training videos (ADOmoney Bank case study). The initial models were afterwards extended by Francois from W4 and tweaked by the whole group during few months of preparations for the demo led by Denis.

Why did we need so much time to prepare? It’s because for the first time we were exchanging that many “hidden attributes”. Plus for the first time we tested importing and exporting many diagrams in one file.

Below you can see a picture showing the processes and how were they split into various tools participating in demo.

Common question I got was: Why did you use 9 tools to model 4 diagrams and did it in parallel? Answer is simple: we wanted all the modelling tools to participate actively and did not want to bore the viewers by showing everything in a sequence.

Modelling part

At 8:40 you will see how Tim starts modelling the (main) Onboarding process with Yaoqiang BPMN Editor.

UPDATE: high-def graphic of a final Onboarding diagram

Now Tobias from Signavio steps in and starts modelling the IT process and afterwards Boris from CaseAgile creates second lane of the main pool.

UPDATE: high-def graphic of a final IT diagram

When Tim, Tobias and Boris finished their models (please note that invisible attributes were added in this part e.g. Data Store parameters by Tim) they saved the diagrams to a common Dropbox repository and second wave of participants joined around 12:48.

I started by importing Tim’s diagram to ADONIS and extending it. Francois from (ITESOFT) W4 did the same with model created by Boris, while Antonio (from ITP commerce) continued work of Tobias.

If you look closely you can see that we show hidden attributes added by our colleagues one step earlier (e.g. I am showing Data Store unlimited plus xsd:string definition added by Tim using special feature of ADONIS which allows you not only to take over any data from other tools, but also view and edit it).

Around 17:48 things are getting really busy (luckily Denis was providing narration all the time). Francois had a big diagram to create, so he continues, while next round of participants joins: Simon from Trisotech (who will be merging all the diagrams), Falko from Camunda (who will be modelling the Payroll pool) and Alessandro from Esteco (modelling Facilities pool).

UPDATE: high-def graphic of a final Payroll diagram

UPDATE: high-def graphic of a final Facilities diagram

When all the diagrams were done and merged by Simon, Boris returns (at 25:52) to show the result in additional tool: BPMN View.

Automation part

At 26:30 the models are moved to the automation tools. Only selected parts of the process were shown in order to save time, but the results were impressive and the audience liked it.

You could see how our process is automated on Omny Link (presented by Tim), Camunda (presented by Falko) and W4 (presented by Benjamin).

Please note that automation did not happen “automagically” in a matter of minutes. Our colleagues were using models from our previous session since automation of a process takes some time (especially if you need to add some nice looking forms, provide integration with other systems etc). However after the event Falko showed me how to move from a simple diagram to a proof of concept automation in a matter of 15 minutes. While sitting in a train!

Your takeaways

1) BPMN allows you to interchange diagrams between various tools.
2) You can model “business diagram” in one tool and move the diagram to the automation tool where it will be extended with needed details and executed. And than you can move the diagram back to the “business tool” (it’s called “roundtrip”).
3) If you want to see how your current (or potential) tool supports BPMN interchange you should take a look at the BPMN MIWG page and see the demo recordings plus test results.

PS. You can also view few tweets with pictures from the event:
https://twitter.com/frncsbnnt/status/871743471526268928
https://twitter.com/tstephen10/status/871759599971557378

There was also a press release about it.

BPM Eastern Europe 2015

BPM Eastern Europe 2015

As you know from my previous posts we (BPMN Model Interchange Working Group) had a chance to make a live demo of the BPMN interchange.

The demo session was very successful and in less than a half of hour participants of the demo could learn more about the BPMN MIWG (from Simon who did the introduction and coordinated our session) and see how a BPMN diagram moves between the “business tools” which change the model (this time Falko started with bpmn.io, I took over with ADONIS and Simon did the last changes with Trisotech) to the execution engines.

This time we had 3 execution engines: W4 (presented by Fran̤ois), Camunda (Falko), and Omny Link (by Tim). As the model was directly transferred to execution with no time for adding technical attributes, there was no room for errors. And there were none Рeverything went smoothly, proving that BPMN interoperability is possible among the tools from BPMN Champions League (term coined by Falko in his post about the event).

Apart from the BPMN MIWG demonstration there were many other interesting sessions during the online summit covering topics like BPM of Things, creating living process applications, digital transformation, digital business (yes – digital was popular topic…), DMN and operational excellence. I also had a chance to present few tips for building the process architecture.

To my surprise my blog (BPM Tips) received the award of “Best BPM promoter in Eastern Europe 2015”.

BEST_PROMOTER_2015

If you did not have a chance to join the Online Summit do not worry as the organizers will soon add the possibility to watch the recordings – I will update this post when they are live.

Recording of the BPMN MIWG session:

My session on Business Process Architecture:

 

BPMN Interchange Demo at OMG Technical Meeting and bpmNEXT

I will be showing ADONIS BPMN 2.0 interchange capabilities during the following event:

BPMN MIWG Logo

Do you need to move your business process models from one tool to another as part of your process improvement lifecycle? Would you like to learn more about BPMN interoperability and how BPMN can benefit your organization? Interested in meeting BPMN experts and being among the first to know about current and future technologies in business process modeling and automation?

A live demonstration of BPMN Model Interchange will concurrently take place during the OMG Technical Meeting and bpmNEXT. Sign up for either event to witness this demonstration in person.

The event will be hosted by Denis Gagne of OMG BPMN Model Interchange Working Group (BPMN MIWG) featuring a multitude of BPMN-based tools and platforms. Do not miss the opportunity to see a smooth and complete interchange of process models between leading software vendors.

Cannot make it? Then join the live stream of the interchange demo via this link: Live-Stream

 

Participants of the demonstration include:

  • Blueworks Live from IBM

  • Bonita BPM Studio Community Edition from Bonitasoft (Open Source)

  • Oracle BPM Suite from Oracle

  • Process Modeler for Microsoft Visio from itp-commerce

  • ADONIS from BOC Group

  • camunda Modeler and camunda-bpmn.js from camunda (Open Source)

  • Signavio Process Editor from Signavio

  • W4 BPMN+ from W4 Software

  • Yaoqiang BPMN Editor from Yaoqiang

  • Activiti Designer from Alfresco (Open Source)

  • BPMN Visio Modeler and BPMN Web Modeler from Trisotech

  • With the participation of BPM.com

  • and the participation of KnowProcess.com

 

At a glance:

bpmNEXT

When: March 25th-27th, 2014
Interchange Demo: March 26th, 2014 at 11:00hrs (PT)
Where: Asilomar Conference Grounds
800 Asilomar Ave, Pacific Grove, CA 93950, United States

OMG technical meeting

When: March 24th-28th, 2014
Interchange Demo: March 26th, 2014 at 14:00hrs (ET)
Where: Hyatt Regency Reston
1800 Presidents Street, Reston, VA 20190

bpmNEXT will showcase what’s next in the area of business process management from 25-27 march. Witness the latest developments in the BPM area and see how to ensure your organization’s ability with the commitment to standards, interoperability and sustainability. Learn how to continue to use the systems and technologies you currently have in place and be ahead with future technologies. Find more information about the program and the speakers at the bpmNEXT website.

The OMG technical meeting on 24-28 march brings together IT architects, business analysts and government experts as well as vendors and end users. Every meeting is a great opportunity to meet and network with these experts and to get a firsthand insight about how to influence the direction of future standards. Connect directly with standards specialists of the tech industry, and learn about the future landscape of enterprise technologies. Find more information on the OMG website, and save the date now!